PER672N Load Share Model

1.internet sharing sat 2.Load Share Model 3.Synchronizers 4.PER672N Load Share Model 5.best price and quality

Specification

Load Share Model (PER672N) PER672N can substitute for LSM672N

Load Share Model (PER672N)

1)Description----The function of the Load Sharing Module is to proportionally share load between two or more generator sets while the system frequency is held constant.As an accessory to the electronic Governing System,the PER 672 measures the true power current ,and throught a parallel cable interconnection,continuously controls the governor system.

2)Performance Load SharingAdjustable to within +/-2% between sets Performance.Isochronous and droop paralleling and power control Reverse Power Monitor.Adjustable from 0.5-20% with a 2 second inverse time constant Forward Power MonitorONtrip point adjustable from 20-100%                                                                    OFFtrip point adjustable from 0-80%                                                                  Normally open contacts with a 2 second inverse time constant

3)Power Output

Signal.0 to 7.5 Volts DC representing 0-100% load All performance specifications are based on 5 amps from the current transformer(CT) Secondaries at full load unity P.F.

4)Power input AC input signals.. 208 or 416 volt nominal line to line and 5 amp CTs with a minimum 6.25 VA rating.                    Internal 0.25 ohm burden resistors Line to line voltagesper table below             HZ      LOW RANGE       HIGH RANGE            50      140-250 VAC         260-420 VAC             60      170-260 VAC         340-500 VAC            400     170-260 VAC         340-500 VAC

DC Supply..18-36 VDC(Transient and reverse voltage protected) DC Power Consumption.70 ma continuous

5)Weight:2.41kg

6)Relative products:

PER672,

PER6714

PER672N Load Share Model